HB-455 Blasting Machine

HB-455 Blasting Machine

(No reviews yet) Leave a Review
$850.00
Part #:
5062
Maximum Purchase:
99999 units
Shipping:
Calculated at Checkout

Item # 5062

The HB-455 has a magnetic security key built into the machine. Simply remove it to disable the machine. This provides an extra safety measure. It also has a built in continuity indicator.
 
 
HB-455

 

Scorpion

Solid-State Electronic Fire Controlled Blasting Machine

 

 

 

 

450 VDC 68 uF Electrolytic

Approximately 3 seconds (peak)

High Intensity Green LED

Intelligent Design / Range Specific

FIRE CONTROL

Approximately 16 oz.

Black

Hardware

HD Black Nylon Plastic & Brass, SS 'D' Rings,

Quick

-Connect Binding Posts, Neck Strap

 

Protected Recessed Pushbutton

Yes. Sealed Electronics

 

ELECTRICAL

450 VDC

5 Joules

MECHANICAL

Urethane Plastic

3"W x 5.25"L x 1.7"D

F/C Resistance Range LED Indication Min. Amperage Fire Circuit

0

- 135 Ohms Green 3.3 Amps Released

 

 

136

- 205 Ohms Amber 2.2 Amps Released

 

 

206+ Ohms

Red N/A Locked

 

 

LED Indicator

Powered by

Polarity

Waterproof

Compartment Cover

Caution:

Do NOT relax CHARGE switch when depressing FIRE switch. The dual switch firing circuit assures the blasters intent to initiate.

 

When READY light fails to illuminate within 5 seconds , replace the Heavy Duty Alkaline 9V battery accessible through the battery cap located on the right side of the unit

Make note to insure proper polarity when replacing battery.

 

Fire Control:

Connect the blasting circuit to the output terminals located on the top of the machine. The HB

-455 will check the resistance level of the attached blasting circuit and

 

indicate the condition of the circuit by the LINE light; conditions listed above. The HB

 

-455 will operate in the Green and Amber conditions, but operation will be locked

 

out if the resistance is found to be above the condition listed for the Red Line condition.

 

To Fire:

Repeat CHARGE and FIRE sequence as in To Test.

 

MANUFACTURER LIMITED LIFETIME WARRANTY

All blasting machine purchases will require an End User Certificate (PDF) and you may also be asked for a copy of your credentials, if not already on file.  

 
Export Administration Regulations (EAR) & International Traffic in Arms Regulations (ITAR):
These items are controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. They may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.