Ideal 25 Cap Blasting Machine with Integrated Continuity Indicator

Ideal 25 Cap Blasting Machine with Integrated Continuity Indicator

(No reviews yet) Leave a Review
$349.00
Part #:
5061
Shipping:
Calculated at Checkout

Item# 5061
Ideal 25 Cap Blasting Machine with integrated circuit tester

Size: 3" W x 1.5" D x 4" H
Weight: 10 oz.
Color: Black and Red
Hardware: HD Black Nylon
Case Features: Compact Design, Waterproof, Impact Resistant, Rugged Push Button Switch Protectors, Quick Connect Binding Posts, Easy 1 Step Battery Compartment
Power Source: Alkaline Heavy Duty 9V
Operating Temperatures: Operating: -20 degrees  to 140 degrees Fahrenheit
                                      Storage: -45 degrees to 180 degrees Fahrenheit
Output Voltage: 200 VDC
Output Energy: 3 Joules
Firing Capacity: 100 Ohms
Continuity Indication: High Intensity Green LED
Test Voltage: 4 mV
Test Current: 70uA
Power Source: Internal
Connection: Quick Connect Binding Posts
Ready Indicator: High Intensity Red LED
Charge/Fire Cycle Time: approx 2 seconds

Operation:

Continuity Tester
Positive continuity will be identified by a lit green indication of the center LED.  This indication will extinguish while the CHARGE switch is being depressed.

To Test
Always check blasting circuit with appropriate for blast test device prior to connecting to Blasting Machine. Before connecting to blasting circuit, depress CHARGE switch unit until READY light to illuminate.  While maintaining pressure on CHARGE switch depress DETONATE switch.  READY light should extinguish immediately.

Caution: Do NOT relax CHARGE switch when depressing DETONATE switch.  The dual switch firing circuit assures the blasters intent to initiate.

When READY light fails to illuminate within 5 seconds, replace the Heavy Duty Alkaline 9V battery accessible through the battery cap located on the right side of the unit. Make note to insure proper polarity when replacing battery.

To Fire
Connect Blasting Machine to blasting circuit and repeat CHARGE and DETONATE sequence as in TO TEST

 

Option to Make it a Kit will include the following:

- Buzz Mo Continuity Tester

- Blaster Shears

- Wire Stripper with Spring

- Tactical Pouch

 

All blasting machine purchases will require an End User Certificate (PDF) and you may also be asked for a copy of your credentials, if not already on file.  

 
Export Administration Regulations (EAR) & International Traffic in Arms Regulations (ITAR):
These items are controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. They may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.