Ideal 50 Blasting Machine

Ideal 50 Blasting Machine

(No reviews yet) Leave a Review
$369.95
Part #:
5035
Maximum Purchase:
99999 units
Shipping:
Calculated at Checkout

Item # 5035

Ideal Blasting 50 Cap Machine
HB50 Scorpion SolidState Electronic Blasting Machine
Ideal Blasting Supply
Manufactured by: EIT Corporation
Model: HB-50
Product ID: 5035
 
HB50
Scorpion SolidState Electronic Blasting Machine
 
Operation:
To Test: Always check blasting circuit with appropriate for blasting test device prior to connecting to Blasting Machine. Before connecting to blasting

circuit, depress CHARGE switch until READY light illuminates. While maintaining pressure on CHARGE switch depress DETONATE switch.

READY light should extinguish immediately.

Caution: Do NOT relax CHARGE switch when depressing DETONATE switch. The dual switch firing circuit assures the blasters intent to

initiate.

When READY light fails to illuminate within 8 seconds , replace the Heavy Duty Alkaline 9V battery accessible through the battery cap located on the right side of the unit. Make note to insure proper polarity when replacing battery. Connect Blasting Machine to blasting circuit and repeat CHARGE AND DETONATE sequence as in To Test. NEVER use the HB50 as an alternate energy source on equipment for which it was not designed. Never use a damaged or questionable machine
Mechanical:
Case Material:    H.D. Urethane
Case Size:    3"W x 1.5"D x 4"H
     7.6cm W x 3.81cm D x 10.13cm H
Weight:    15.8 oz. (0.312 kg)
Shipping Weight:    2 lb. (0.908 kg)

Electrical:

Type of Circuitry:    Solid State Electronic
Firing Control Circuit:    SCR (silicon controlled rectifier)
Firing Voltage:    220 VDC Minimum / 225 VDC Maximum
Firing Energy:    4.0 Joule (w/s)
Power Source:    1 Ea. 9V Alkaline Cell (NEDA  )
Battery Voltage:    9V
H.V. Source:    Inverter, Solid State Electronic
Energy Storage:    Capacitor, Special Electrolytic, H.D.

Capacity:

Straight Series:    50 - 2 Ohm Electric Blasting Caps
Series Parallel:    2 Series of 25 - 2 Ohm Electric Blasting Caps
Max. Ohms @ 1.5 Amperes & 0.025 Joules / Ohm Circ. Res.:    135




MANUFACTURER LIMITED LIFETIME WARRANTY
 

Option to Make it a Kit will include the following:

- Buzz Mo Continuity Tester

- Blaster Shears

- Wire Stripper with Spring

- Tactical Pouch

 

All blasting machine purchases will require an End User Certificate (PDF) and you may also be asked for a copy of your credentials, if not already on file.  

 
Export Administration Regulations (EAR) & International Traffic in Arms Regulations (ITAR):
These items are controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. They may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.