SBS-T Electric and Shocktube Blasting Machine

(No reviews yet) Leave a Review

$750.00

Part #:: 5297
Shipping:: Calculated at Checkout

Item # 5297

SBS-T Electric and Shocktube Blasting Machine

This new SBS-T (Tactical) combo blasting machine improves upon the L-SBS. It is smaller in size. Also a new shocktube tip design which is more rugged and negates removal of the tip to operate the electric post. It has a continuity tester built in which displays three different resistance rating based upon the circuit's ohm reading

EIT

Manufactured by: EIT-Corp

Model: SBS-T

Product ID: 5297

MANUFACTURER LIMITED LIFETIME WARRANTY

All blasting machine purchases will require an End User Certificate (PDF) and you may also be asked for a copy of your credentials, if not already on file.

Export Administration Regulations (EAR) & International Traffic in Arms Regulations (ITAR):
These items are controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. They may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.

Scorpion Solid‐State Electronic Blasting Machine with Continuity/Resistance Indicator & Electronic Non Electric Initiator

ELECTRIC INITIATION
FIRING ENERGY:	450VDC @ 5.0Joules
FIRING CAPABILITY:	Electric Blasting Caps, Electric Breech
FIRING CAPACITY:	250 Ohms circuits requiring minimum 1.5A @ 20mJ/Ohm of resistance
FIRE CIRCUIT:	Locked out unless full charge is available
ARMED INDICATOR:	High visibility green LED
LEAD LINE RESISTANCE DETECTION
DETECTION:	Immediate indication of load resistance
TEST SIGNAL:	2.3mA(0.0023A), Fuse Protected
INDICATION:	Green 0-150 Ohms
	Amber 151-250 Ohms
	Red 251+ Ohms
NON-ELECTRIC INITIATION
FIRING ENERGY:	2,500 VDC @ 0.5 Joules
FIRING CAPACITY:	1 Non -Electric Shock Tube Line
CONNECTION:	Replaceable Shock Tube Connector (STC )
TYPE:	EIT STC -E (Electrode In Tube )
SAFETY
ELECTRIC OUTPUT:	Binding Posts shunted internally
ELECTRIC ABORT:	Safe internal discharge when ‘Charge’ switch is released before ‘Fire’
ELECTRIC FIRING:	Requires sequenced 2 switch operation
CONTINUITY:	Indicator immediately disengages during Charge/Fire operation
MECHANICAL
DIMENSION:	3″wide x 2″thick x 6″high (7.6cmx 5cmx 15.2cm)
WEIGHT:	18 oz w /battery (510g)
CASE MATERIAL:	HD Urethane
HARDWARE:	Brass, Nylon, Rubber
INGRESS:	IP68 (3m)
OPERATING TEMP:	Tested -20°F -140°F (-29°C -60°C )
STORAGE TEMP:	Tested -45°F -180°F (-42°C -82°C )
COLORS:	Black, Yellow, Tan, OD Green
POWER SOURCE
BATTERY:	Replaceable 9V (HD alkaline recommended )
LIFE:	~250+ Charge/Fire Cycles typical
FEATURES
CONNECTION:	EIT’s quick-connect HD Output Binding Posts
SWITCHES:	Recessed & Guarded with rugged waterproof boots
BATTERY:	Battery loads smoothly through side of unit and is secured in place by easy-on/off battery cap
WARRANTY:	Lifetime warranty against manufacturing defects