Browse Categories
Mailing Lists
 

Ideal 50 Blasting Machine

<< Previous in 50+ Blasting Caps Next in 50+ Blasting Caps >>
Price: $355.00
Item Number: 5035
Ideal Blasting 50 Cap Machine
HB50 Scorpion SolidState Electronic Blasting Machine
Ideal Blasting Supply
Manufactured by: EIT Corporation
Model: HB-50
Product ID: 5035
5 based on 35 reviews
342.00 New
HB50
Scorpion SolidState Electronic Blasting Machine
 
Operation:
To Test: Always check blasting circuit with appropriate for blasting test device prior to connecting to Blasting Machine. Before connecting to blasting

circuit, depress CHARGE switch until READY light illuminates. While maintaining pressure on CHARGE switch depress DETONATE switch.

READY light should extinguish immediately.

Caution: Do NOT relax CHARGE switch when depressing DETONATE switch. The dual switch firing circuit assures the blasters intent to

initiate.

When READY light fails to illuminate within 8 seconds , replace the Heavy Duty Alkaline 9V battery accessible through the battery cap located on the right side of the unit. Make note to insure proper polarity when replacing battery. Connect Blasting Machine to blasting circuit and repeat CHARGE AND DETONATE sequence as in To Test. NEVER use the HB50 as an alternate energy source on equipment for which it was not designed. Never use a damaged or questionable machine
Mechanical:
Case Material:    H.D. Urethane
Case Size:    3"W x 1.5"D x 4"H

   7.6cm W x 3.81cm D x 10.13cm H
Weight:    15.8 oz. (0.312 kg)
Shipping Weight:    2 lb. (0.908 kg)

Electrical:

Type of Circuitry:    Solid State Electronic
Firing Control Circuit:    SCR (silicon controlled rectifier)
Firing Voltage:    220 VDC Minimum / 225 VDC Maximum
Firing Energy:    4.0 Joule (w/s)
Power Source:    1 Ea. 9V Alkaline Cell (NEDA  )
Battery Voltage:    9V
H.V. Source:    Inverter, Solid State Electronic
Energy Storage:    Capacitor, Special Electrolytic, H.D.

Capacity:

Straight Series:    50 - 2 Ohm Electric Blasting Caps
Series Parallel:    2 Series of 25 - 2 Ohm Electric Blasting Caps
Max. Ohms @ 1.5 Amperes & 0.025 Joules / Ohm Circ. Res.:    135




MANUFACTURER LIMITED LIFETIME WARRANTY
Ideal 50 Blasting Machine
Ideal 50 Blasting Machine

Related Products

Battery Cap C3 Tester For EIT Machines
Battery Cap C3 Tester For EIT Machines
Price: $102.25
Battery Cap C3 Tester For EIT Machines
Item # 5199
Guardian Pouch
Guardian Pouch
Standard: $9.95
Price: $7.00
Guardian Pouch
Item# 4195
Ideal 10 Cap Blasting Machine
Ideal 10 Cap Blasting Machine HB10
Standard: $182.04
Price: $169.95
Ideal 10 Cap Blasting Machine HB10
Item # 5059

Product Reviews

(0 Ratings, 0 Reviews)
Shopping Cart
Your cart is empty.
 

Follow Us on LinkedIn
 
-